Products > Edgebander Replacements

WhisperCut PCD Symmetrical Pre-Milling Cutter 80x50x30+2KN Z=2+2 Replace CCEN350128 S16442 S13076

WhisperCut PCD Symmetrical Pre-Milling Cutter 80x50x30+2KN Z=2+2 Replace CCEN350128 S16442 S13076

• WhisperCut PCD Pre-Milling Cutter
• 80x50x30+2KN Z=2+2 Whisper Cut PCD Pre-Mill cutters
• Replace BIESSE Id-No. CCEN350128
• Replace Wirutex Id-No. S16442 (80x48x30mm Z2+2 DKN)
• Replace Wirutex Id-No. S13076 (80x49x30+2KN Z=2+2)
• Low-noise PCD pre milling cutter
• Diamond pre milling cutters
• Symmetrical pre-milling cutter for edgebanding machines
INQUIRY

Wirutex S16442.jpg

WhisperCut PCD Symmetrical Pre-Milling Cutter 80x50x30+2KN Z=2+2 Replace CCEN350128 S16442 S13076

This WhisperCut Pre-Milling cutter 80x50x30+2KN Z=2+2 is Symmetrical with replacement PCD inserts for pre-milling in preparation for edgebanding. It is a replacement for Biesse CCEN350128 Wirutex S16442 (80x48x30mm Z2+2 DKN) and Wirutex Id-No. S13076 (80x49x30+2KN Z=2+2) pre-milling cutterheads.
Symmetrical pre-milling cutter.jpg

The WhisperCut PCD replaceable edge which can be interchanged and re-sharpened several times. Your can order Whisper Cut diamond inserts as spare parts in case use.
BIESSE CCEN350128.jpg

This Pre-mill cutter is suitable for working on chipboard panel, coated, laminated, veneered, M.D.F., coated chip and fibrous materials, as well as fibre-reinforced plastics such as GRP or CFRP, pre-milling in preparation for edgebanding. Excellent finishing, low noisiness.
Wirutex S13076.jpg

WhisperCut PCD Pre-mill Cutter Advantages:
1, Noise reducing, protect the ears of the user
2, Reduction in the spindle load due to lightweight construction, protects the machine
3, Cost savings due to exchange of individual cutting plates

Diamond pre milling cutters.jpg

80x50x30+2KN Z=2+2 Whisper Cut Cutterhead Specification:

Outer diameter:	80 mm
Bore:	30+2KN
Cutting thickness:	50 mm
Z (knives):	2+2
Axiality	45°
Material:	Aluminum alloy with PCD tips
Nmax (RPM):	12000

Low-noise PCD pre milling cutter.jpg

A range of PCD pre-milling cutterheads for edge bending machines are available here.

D (mm)	B (mm)	d (mm)	Z	Wirutex Id-No.	BIESSE Id-No.
80	49	30+2KN	3+3	S13165	CSEN350085
80	65	30+2KN	3+3	S13164	CSEN350086
80	49	30+2KN	2+2	S13076
80	65	30+2KN	2+2	S12805

Whisper Cut PCD Pre-Mill cutters.jpg
RicoCNC supplies cutterheads and spare tools for Biesse, Bi-Matic, Brandt, Felder, Laguna, Hebrock, Holzher, Homag, IMA, KDT, Lange, Cehisa, OTT & SCM, Nanxing edgebanders.

If any needs for edgebanding machine spare parts, welcome to contact us.
WhisperCut PCD Pre-Milling Cutter.jpg