Products > CNC Router Bits

Up Down Cut Single Flute Spiral 1+1 Compression Router Bits

Up Down Cut Single Flute Spiral 1+1 Compression Router Bits

• 1 flute compression bits
• 1 flute compression cut spiral end mill
• CNC solid carbide compression spiral 1-flute
• Single flute compression spiral bit
• Solid carbide compression spiral single flute
• 1+1 Up-Down, solid carbide router bits
• Up/down cut spiral router bits
• Up down cut 1 flute spiral (1+1 Compression)
INQUIRY

1 Flute Compression Cut Spiral End Mill.jpg

Up Down Cut Single Flute Spiral 1+1 Compression Router Bits

1 flute compression bits cut down from the top of the stock and up from the bottom of the stock simultaneously. This bit can be used for mortising projects that require a smooth bottom surface without sacrificing the mortised edge finish.
Single Flute Compression Spiral Bit.jpg

Single Flute Up-Down Compression Bits Features:
• Up/down cut spiral router bits for a superior fine finish to double-sided laminates and veneers.
• Up/down-cut spirals may also be referred to as compression bits (1+1 compression for single flute in both directions).
• The design of this bit lends itself to super-fine finishing on both edges.
• Chip clearance is directed inwards – towards the center of the routed face; an ideal tool for trimming edges where chip clearance is proficient.
• Compatible with CNC, table-mounted routers, and handheld routing.

1 flute compression bits.jpg

1 Flute Compression Router Bits Excellent for Cutting:
Laminate
Laminated Plywood
Melamine
Melamine Particle Board
MDF/HDF
Oriented Strand Board (OSB)
Particle Board
Softwood/Hardwood
Veneered Plywood
1+1 Up-Down, Solid Carbide.jpg

Compression Cut End Mills.jpg

1 Flute Compression Solid Carbide CNC Router Bits Sizes:

Item No.	CED (mm)	CEL (mm)	SHK (mm)	OVL (mm)
A1FLX3.10	3.175	10	3.175	40
A1FLX3.12	3.175	12	3.175	40
A1FLX3.17	3.175	17	3.175	45
A1FLX3.22	3.175	22	3.175	50
A1FLX3.25	3.175	25	3.175	55
A1FLX3.32	3.175	32	3.175	65

CNC Solid Carbide Compression Spiral 1-Flute.jpg

Other sizes can be customized.
CNC Solid Carbide Compression Spiral Single Flute.jpg

RicoCNC also can supply other CNC router bits, such as:
UP cut 3 flutes spiral router bits,
Ball nose Carving Bits,
Two Flutes Carbide Up-cut Spiral Bit,
Single Flute Acrylic Cutting Bits: (specially for acrylic cutting),
CNC Router Bits for Aluminium Cutting,
2 Flutes Compression Router Bits,
3 Flute Compression Solid Carbide CNC Router Bits,
TCT double straight flutes router bits,
Single Flute Spiral Router Bits,
Straight Plunge Router Bits,
3 Flutes Chip-Breaker Spiral Bits,
Conical ball nose router bits,
Down Spiral Router Bit, etc.
Updown cut spiral router bits.jpg