Products > CNC Router Bits

Single Edge O Flute Downcut End Mills 1 Flute Down Cut Spiral Router Bits

Single Edge O Flute Downcut End Mills 1 Flute Down Cut Spiral Router Bits

• Single Edge 'O' Flute Downcut End Mills
• Down spiral wood bits
• Single flute down spiral bits
• Down cut spiral router bit
• 1 flute downcut router bits
• Single flute downcut endmill
• Spiral single flute down cutter
• Down-cut tool bits
INQUIRY

Single flute downcut endmill.jpg

Single Edge O Flute Downcut End Mills 1 Flute Down Cut Spiral Router Bits

The single flute down cut spiral router bits designed for maximise smooth finish with downward cut for enhanced material holding, prevent workpiece lifting during cutting. The downward spiral is especially useful to create downward chip flow and hold the part to the table during cutting. The special geometery is designed to give best edge finish on hard acrylic plastics.
single flute cnc router bit.jpg

This down cut single flute bits excellent for routing soft plastics, like HDPE, UMHW, Polycarbonates, Polystyrene, Extruded Acrylic, Gatorfoam, Coroplast, PVC, Trespa, Signfoam, Foamex, ACM, Dibond, HPL, and even some softer woods.
down cut bits.jpg

Tungsten steel tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems, Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
down cut spiral router bit.jpg

The blade tip is not easy to damage, the surface of carving is more smooth, and the chip removal effect is better.
Single flute down spiral bits.jpg

Spiral single flute down cutter.jpg

Single Flute Spiral down cut Router Bits:

Item No	CED(mm)	CEL(mm)	SHK(mm)	OVL(mm)
1LXD3.102	1.0	2	3.175	40
1LXD3.103	1.0	3	3.175	40
1LXD3.1.503	1.5	3	3.175	40
1LXD3.204	2.0	4	3.175	40
1LXD3.206	2.0	6	3.175	40
1LXD3.208	2.0	8	3.175	40
1LXD3.06	3.175	6	3.175	40
1LXD3.08	3.175	8	3.175	40
1LXD3.10	3.175	10	3.175	40
1LXD3.12	3.175	12	3.175	40
1LXD3.15	3.175	15	3.175	40
1LXD3.17	3.175	17	3.175	45
1LXD3.22	3.175	22	3.175	50
1LXD408	4	8	4	45
1LXD412	4	12	4	45
1LXD417	4	17	4	50
LXD422	4	22	4	50
1LXD512	5	12	5	50
1LXD517	5	17	5	50
1LXD522	5	22	5	55
1LXD612	6	12	6	45
1LXD617	6	17	6	50
1LXD622	6	22	6	55
1LXD6312	3.0	12	6	50
1LXD6317	3.0	17	6	50
1LXD6412	4.0	12	6	50
1LXD6417	4.0	17	6	50
1LXD6522	5.0	22	6	55
1LXD820	8	20	8	75
1LXD825	8	25	8	80
1LXD835	8	35	8	90
1LXD1025	10	25	10	80
1LXD1035	10	35	10	90
1LXD1045	10	45	10	100
1LXD1235	12	35	12	90
1LXD1245	12	45	12	100
1LXD1255	12	55	12	110

Single Edge 'O' Flute Downcut End Mills.jpg

RicoCNC also can supply other CNC router bits, such as:
UP cut 3 flutes spiral router bits,
Ball nose Carving Bits,
Two Flutes Carbide Up-cut Spiral Bit,
Single Flute Acrylic Cutting Bits: (specially for acrylic cutting),
CNC Router Bits for Aluminium Cutting,
2 Flutes Compression Router Bits,
3 Flute Compression Solid Carbide CNC Router Bits,
TCT double straight flutes router bits,
Single Flute Spiral Router Bits,
Straight Plunge Router Bits,
3 Flutes Chip-Breaker Spiral Bits,
Conical ball nose router bits,
2 Flutes Down Spiral Router Bit,
TCT nesting bits,
PCB router bits, etc.
1 flute downcut router bits.jpg