TAKEX GMR2RPNN-J Photoelectric Sensor POLAR REFLECTOR

TAKEX GMR2RPNN-J Photoelectric Sensor POLAR REFLECTOR

-GMR2RPNNJ

-PHOTOELECTRIC SENSOR

-POLAR REFLECTOR

-HEAD ON 0.3 TO 1.5M RANGE

-INPUT 12-24VDC/OUTPUT

-PNP 100MA 30VDC MAX

-STABILITY OUT 50MA

-30VDC MAX

GMR2RPNN-J

Rating/Performance/Specification

Detection method: Polarized retroreflective

Detecting distance: 0.03 - 1.5 m

Detection object: Glossy objects including mirror-like, materials and stainless-steel, plates or opaque objects

Power supply: 12 - 24V DC ±10% / Ripple 10% or less (* 5VDC model)

Current consumption: 35mA or less

Output mode: Control output : PNP open collector output Rating: source current 100mA (30 VDC) or less / Residual voltage: 2 V or less

Stability output : NPN open collector output Rating: sink current 50mA (30 VDC) or less / Residual voltage: 1 V or less

Operation mode: Light-ON/Dark-ON selectable (with switch)

Response time: 0.5ms or less

Operating angle: 30° (at reflector)

Light source (light wavelength): Red LED (700nm)

Indicator: Operation indicator (red LED)

Stability indicator: (green LED)

Volume(VR)SENS: sensitivity adjustment (on receiver for through-beam type)

The detecting distance of diffuse reflective type varies, depending on transmittance of the detection object. Please be sure to check the detection beforehand.

The detecting distance and detection object of the reflective type vary, depending on a reflector combined with the sensor.

The detecting distance is the range which you can set for the reflector. The sensor can detect an object even in extremely short range.

Environmental Specification

Ambient light: 5,000 lx or less

Ambient temperature: -25 - +55 ℃ (non-freezing)

Ambient humidity: 35-85%RH (non-condensing)

Protective structure: IP67

Vibration: 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction

Shock: 500 m/s2 / 3 times each in 3 directions

Dielectric withstanding: 1,000 VAC for 1 minute

Insulation resistance: 500 VDC, 20 MΩ or higher

RicoCNC is a reliable CNC and industrial automation spare parts supplier based in China. You can find a number of CNC machine parts here, such as CNC tool holders, collets, nuts, pull stud, collet spanner, toolholder tightening fixture, cnc tooling systems, tool holder forks, CNC machining center parts and edge banding machine parts.

Welcome to contact us if any inquires for automation parts!

Contact Us