Welcome: Premium CNC Router Parts & Tools Store. Contact us Today: cncsale@ricocnc.com
  • CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit
  • CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit
  • CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit
  • CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit
  • CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit
  • CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit
  • CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit
  • CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit
CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit

CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit

  • • 3 Flutes Chip Breaker Spiral Bit
  • • Roughing Spiral 3 Flute Chipbreaker
  • • 3 Flute Chip Breaker
  • • 3 flute router bits
  • • 3 flutes chip-breaker spiral bits
  • • 3 Flute Upcut Chipbreaker Spiral router bits
  • • 3 flute Chipbreaker endmill
  • • Rougher end mill
  • INQUIRY

chipbreaker Up-cut spiral router bits.jpg

CNC Solid Carbide 3 Flutes Up-cut Spiral Chip Breaker Roughing Router Bit

This chip breaker CNC router bits feature three flutes and break up the chips as they cut by including wide-spaced serrations in the flutes. These bits fall in between a rougher and a finisher spiral and are an excellent choice when higher CNC feed rates are required in hardwoods, plywood, and dense materials.
Chipbreaker Spiral Upcut Bit.jpg

Excellent for cutting:
Wood
Veneered Plywood
Laminate
Roughing Spiral 3 Flute Chipbreaker.jpg

Chip breaker design is available with 'Up-Cut' or 'Down-Cut', also Compression.

3 flutes chip-breaker spiral bits.jpg

• Up-Cut spirals pull chips toward the shank. they are commonly used for dadoing or mortising with smooth flat bottoms.
• Down-Cut spirals push chips away from the shank. They are commonly used in laminated, veneer, or inlay applications and produce a clean-finished surface. Not for router table use.
• Compression spirals, mostly used in CNC applications, are a combination of up and down shear flutes to eliminate chipping on both sides of laminated materials or double-sided veneers for a fine finish.
3 Flute Upcut Chipbreaker Spiral router bits.jpg

3 Flutes Chip-Breaker Spiral Bits Sizes:

3 Flute Chipbreaker Spiral Drawing.jpg

Item No.

CED (mm)

CEL (mm)

SHK (mm)

OVL (mm)

NMDRX617

6

17

6

50

NMDRX622

6

22

6

55

NMDRX625

6

25

6

60

NMDRX825

8

25

8

60

NMDRX835

8

35

8

80

NMDRX1025

10

25

10

60

NMDRX1035

10

35

10

80

NMDRX1045

10

45

10

90

NMDRX1055

10

55

10

100

NMDRX1075

10

75

10

130

NMDRX1235

12

35

12

80

NMDRX1245

12

45

12

90

NMDRX1255

12

55

12

100

NMDRX1275

12

75

12

120

NMDRX12100

12

100

12

150

NMDRX12.35

12.7

35

12.7

80

NMDRX12.45

12.7

45

12.7

90

NMDRX12.55

12.7

55

12.7

100

NMDRX12.65

12.7

65

12.7

110

NMDRX12.100

12.7

100

12.7

150

NMDRX1645

16

45

16

100

NMDRX1655

16

55

16

110

NMDRX1675

16

75

16

130

NMDRX16100

16

100

16

150

NMDRX16150

16

150

16

200

NMDRX2075

20

75

20

150

NMDRX20100

20

100

20

200

NMDRX20150

20

150

20

250

NMDRX20200

20

200

20

300

Rougher end mill.jpg

RicoCNC supplies a range of best quality CNC router bits, such as: PCD router bits, Ball nose Carving Bits, Two Flutes Carbide Up-cut Spiral Bit, Single Flute Acrylic Cutting Bits: (specially for acrylic cutting), CNC Router Bits for Aluminium Cutting, 2 Flutes Compression Router Bits, 3 Flute Compression Solid Carbide CNC Router Bits, TCT double straight flutes router bits, Single Flute Spiral Router Bits, Straight Plunge Router Bits, 3 Flutes Chip-Breaker Spiral Bits, Conical ball nose router bits, Down-cut Spiral Router Bit, TCT nesting cutting router bits, etc.
3 Flute Chip Breaker.jpg

Welcome to contact us if any inquires for CNC spare tools!
chip breaker end mill.jpg


3 flute endmill.jpg

Contact Us

Scan Our Wechatclose
Scan Our Wechat